34
EN
Start Button (
6
). Start the countdown
for the new time by pressing the Start
/ Pause / Cancel button (
2
) again.
Salt Indicator
Please check the salt indicator (
9
)
on the display to see whether there
is enough softening salt in your
machine or not. You need to refill the
powder dispenser whenever the salt
warning indicator light lights.
WARNING:
If the water hardness level is stored
as (
r1
), salt indicator will never come
on even if the salt container is empty.
(Adjusting the water hardness level is
explained in Water Softening System
section.)
Rinse Aid Indicator
Check the rinse aid warning display
(
10
) on the screen to find out if there
is sufficient amount of rinse aid in
your machine. You must refill the
rinse aid container when the rinse aid
indicator comes on.
WARNING:
If the Rinse Aid Indicator is set
to (OFF), rinse aid indicator will
never come on even if the rinse aid
container is empty.
Rinse Aid Indicator Setting
•
When your machine is switched
off, press Half Load button (
5
)
and then On / Off button (
1
) to
switch it on.
•
Hold Half Load/Tablet Detergent
button (
5
) pressed and release
On / Off button (
1
).
•
Keep Half Load/Tablet Detergent
button (
5
) pressed for three
seconds more.
•
Rinse Aid Indicator (
10
) comes on
and the stored rinse aid indicator
status of your machine appears
on the display in the format of
“ON” or “OFF”.
•
You can change the status of the
indicator as “ON” or “OFF” with
Start / Pause / Cancel button (
2
).
If you switch off the machine with
“On/Off” button (
1
) when the
status is “ON”, then the rinse aid
indicator will come on when the
rinse aid level in your machine
becomes low while the machine
is in use. If you switch off the
machine with “On/Off” button (
1
)
when the status is “OFF”, then
the rinse aid indicator will never
come on.
Starting Your Machine
•
Plug the mains plug into the wall
socket.
•
Open the tap.
•
Open the door.
•
Place the dishes.
•
Check if the upper and lower
impellers rotate freely.
•
Put sufficient amount of
detergent in the detergent
dispenser and close its lid.
•
Press On/Off button.
•
Check if the salt and rinse aid
warning indicators (
9
,
10
) light
and add salt and/or rinse aid if
needed.
•
Determine your washing program
with the aid of the Program
Data and Table of Average
Consumption Values.
•
You can select the determined
washing program by pressing
program selection button (
4
).
•
You can see the program time
Summary of Contents for OM 62-27 T
Page 1: ...OM 62 27 T...