Gram KP 660, Instructions For Use Manual

Page: 26 / 64

76-504-0648 26
Power failure
If the power fails, the control will remember the settings.
When power is restored, the cabinet will always start up on the storage program,
irrespective of whether the time and/or chilling program was active prior to the power
failure.
Cleaning
At regular intervals the inside of the cabinet should be cleaned and inspected
thoroughly before restarting. The external cladding is best cleaned with a weak soap
solution. To avoid scratching, do not use scouring powder or similar material. The
compressor compartment and in particular the condenser must be kept free of dust
and dirt. Here, a vacuum cleaner is best. The compressor compartment and
refrigerating element (at the top of the cabinet interior) must not be sprayed with
water. To do so is to risk short-circuiting and damage to electrical parts.
NOTE! Before cleaning, disconnect the cabinet at the wall plug.
Servicing
The refrigerating system and the hermetically-sealed compressor need no inspection
- only cleaning. The panel screen cover can be removed by pushing it upwards. If
refrigeration fails in some way, first check to make sure the power has not
inadvertently been switched off and then check the house fuses. If the cause of the
failure cannot be found, contact your supplier. Give the type name and part number.
TYPE, SER.NO. and PART NO. are given on the nameplate on the inside of the side
panel.
Nameplate