Gram KF3135-90, User Manual

Page: 92 / 128

EN
7
3 Installation
B
Please remember that the
manufacturer shall not be held liable if
the information given in the user guide
is not observed.
Points to be considered
when re-transporting your
fridge/freezer
1. Your fridge/freezer must be
emptied and cleaned prior to any
transportation.
2. Shelves, accessories, and etc. have
to be fastened securely by adhesive
tape against any jolt before repacking
the appliance.
3. Packaging must be tied with thick
tapes and strong ropes and the
rules of transportation printed on the
package must be followed.
Please do not forget…
That recycled material is an
indispensable source for the nature
and for our national resources.
If you would like to contribute to
the recycling of the packaging, you
can get further information from
the environmental bodies or local
authorities.
Before operating your fridge/
freezer
Before starting to use your fridge/freezer,
check the following:
1. The interior of the freezer has to be dry
and it is possible for the air to circulate
freely at the back of the applianceto
circulate freely at the back of the
appliance.
2. You can install the 2 spacers as
illustrated in the figure. Spacers
will provide the required distance
between your fridge/freezer and the
wall in order to allow the air circulation.
(The illustration is only an example and
does not match your product.)
3. Clean the interior of the freezer as
recommended in the "Maintenance
and cleaning" section.
4. Plug the refrigerator into the outlet.
When the door is open the interior
light in the refrigerator compartment
will be switched on.
5. You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
even if the compressor is not running
and this is quite normal.
6. The front edges of the fridge/freezer
may feel warm. This is normal. These
areas are designed to be warm to
avoid condensation.