3
BUTTON FUNCTIONS
Power on/Power off.
By pressing this button, the indicator turns on. When the indicator is on,
press this button for approximately one second to turn it off.
Weight unit change button.
By pressing this button, you can change the weight unit. In menu mode,
it will work as an escape button and return to normal mode (Escape). By keeping this button
pressed for over one second it starts the piece-counting mode.
Gross/Net button.
When the tare is used, pressing this button will show the total weight. Pressing
it again will show the net weight. By keeping it pressed for over a second it automatically selects
the “Weight limit” mode.
PLU button
Press this button to enter the menu and to access previously stored values of weight
limits, piece counters, tares and other useful functions. By keeping this button pressed for over a
second, it enters the factory mode and asks for a passwords (only accessible to authorised users).
Zero button.
It sets the scale to zero, correcting possible deviations. By pressing this button for
over a second, it shows the display test, capacity, division and software version.
Tare button.
Pressing this button once will subtract the weight of any container or box located on
the platform, until the container or box is removed and the tare button is pressed again. Keeping
this button pressed will give you access to the tare memory.
MR and left arrow.
By pressing this button on the main screen, it closes and sends the
accumulated ticket data. It shows the total accumulated weight. In menu mode, it confirms the
selected adjustment value and it returns to the previous menu.
M+ and right arrow.
Press this arrow to have the device memorise the value shown on the display.
It starts the accumulated ticked (if it was not already started) and sends the ticket data to the
printer if it is set up. For a few seconds, it also shows the accumulated total. In menu mode, it
shows the next function.
Clock and top arrow.
By pressing it, it shows the accumulated value. If you press it for over a
second it shows the scheduled date and time. In menu mode, it increases the value (digit) of the
display.
MC and bottom arrow.
In menu mode, it decreases the value (digit) of the display.
Enter.
Pressing this button on the main screen, it sends current weight data to the printer (simple
mode). By pressing this button for 5 seconds, it will activate the lock/unlock function of the
touchpad. In menu mode, it confirms the selection/modification made.
