EN
10
Electric connection
Connect your product to a grounded
socket which is protected by a fuse
with the appropriate capacity.
Important:
• The connection must be in
accordance with the national
regulations.
• The power cable plug must be easily
accessible after installation.
• Extension cords and connectors
must not be used for connection.
B
A damaged power cable must be
replaced by an authorised
technician.
Disposing of the packaging
The packaging may be dangerous for
children. Keep it out of the reach
of children or dispose of it by
classifying it in accordance with the
waste instructions. Do not dispose
of it together with the normal
household waste.
The packaging of your freezer is made
from recyclable materials.
Disposing of your old freezer
Dispose of your old freezer without
harming the environment.
• You may consult your authorized
retailer or the recycling depot in your
municpality about the disposal of your
freezer.
Before disposing of your freezer, cut
out the electric plug and, if there are
any locks on the door, make them
inoperable in order to protect children
from any danger.
Placing and installation
1.There must be appropriate air
ventilation around your freezer in order
to achieve an efficient operation.
2. Place your freezer on a level
floor to prevent jolts.
3. Do not keep your freezer in ambient
temperatures under 10°C.
Changing the door opening
direction
The door opening direction of your
freezer can be changed according
to the place you are using it. Please
contact GRAM service, if it is necessary
to change the door opening direction.
Adjusting the legs
If your freezer is unbalanced you can
balance the freezer by turning the front
legs as shown in the illustration below.
The corner where the leg exists is
lowered when you turn the leg in the
direction of the black arrow and raised
when you turn in the opposite direction.
Getting help from someone to slightly
lift the freezer will facilitate this process.
