Gram FS 230-00, Manual

Page: 11 / 28

11
Changing the door hinge over to the opposite side
Illustrations 14-19 over the page, show how easy it is to change the
doors from right-hinged to left-hinged, or vice versa. (Changing
the door from left to right is done in the same way, but opposite).
Top and bottom left hand hinges and accessories are supplied in
the parts kit.
*The freezer must be switched off and emptied completely.
- Remove the 2 screws in the hinge top on the right-hand side of
the cabinet. (14)
- Lift the freezer door slightly and take the door and upper hinge
off by pulling the door towards you.
- Remove the dummy hinge from the opposite side by unscrewing
the 2 screws. (15)
- Reverse the dummy hinge and refit it on the opposite side of the
cabinet using 2 screws.
- Tilt the freezer to an angle of max. 45
º and unscrew the bottom
hinge. This is done by removing the 2 screws holding the bottom
hinge on the cabinet underside. (16)
- Remove the lower dummy hinge in the opposite side in the same
way as the upper dummy hinge was removed. (17)
- Reverse the dummy hinge and refit it on the opposite side of the
cabinet.
- Reverse the upper right-hand hinge and refit it in the lower
left-hand corner of the cabinet.
- Place the cabinet in the correct position again.
- Remove the door handle by removing the screws. (18)
- Reverse the lower right-hand hinge and refit it on the top part of
the door in the left side of the cabinet. Push the door into position
and slide the upper hinge into the upper left-hand hinge casing.
Tighten the 2 screws. Remember to adjust the hinges.
- Remove the screws on the right-hand side of the door and screw
them onto the left side of the door. Use the screws from the left
side to attach the handle to the right-hand edge of the door. (19)