Gram FR 320, Operation Manual

Page: 20 / 34

20
Note: The print function is separate from the line feed setup, i.e set the print
function first then set the number of line feeds.
To set the print type, use the following procedure:
1. Press the
key the display will show
“PrInt”.
2. Press the
key, the display will show
“STAbLE”, which indicates
stable print as the default.
3. Press the
key to choose the print type and confirm pressing the
.
4. Press the
key until the display reads
“InTEr”, press the
key,
the display will show “SEC”.
5. Press the
key repeatedly to see the predeterminated time interval and
press the
to confirm. The message
“0 SEC” means countinous print.
6. Press the
key to return to weighing mode.
7. After entering print setup, press the
key repeatedly to see
predetermined line feed (1-18) choose proper line feed and press the
to return to normal weighing mode.
SETTING THE BAUD RATE
1. Press the
key.
2. Press the
key, the balance reads
“bAud”.
3. Press the
key, the balance reads
“300”.
4. Press the
key repeatedly, the balance display the other baud rates.
Choose the proper rate and press
key to confirm. The balance reads