11/19
GrainPro®
GrainSafe™ Bag
-1.0/G-HF Instruction Manual
MA4020JVD1025-3
b.
If the leg area is smaller, can be
optionally cut in half to fit. Cut along the
lines at the back of the rodent guard.
5.5.2.
Fold the rodent guard's teeth upwards
against the sides of the leg to keep it from
slipping.
5.5.3.
Make sure to overlap the sides at least one
inch.
5.5.4.
Lock the overlap using staple wire, cable
wire, or any fastener.
5.6.
OUTDOOR INSTALLATION
5.6.1.
The GS Bag-1.0/G-HF must be
protected from the direct heat of the
sun by installing shade/cover such as a
roof cone from any available
insulating material (straw, reflective
material, matting) that are commonly
used to protect traditional local
storage facilities.
5.7.
PROCEDURE FOR PURGING CARBON DIOXIDE (CO
2
)
5.7.1.
Calculation:
a.
Total Volume – Volume Occupied by the Commodity.
b.
For every 2.0kg CO
2
, 1 cubic meter of gas is being liberated.
c.
Additional 15% will be added to the total capacity.
d.
Formula: (1-Bulk Density) x Volume x 2 x 1.15.