16/19
GrainPro® Cocoon Indoor™ Instruction Manual
MA4044RAD1114-7
6.
MAINTENANCE AND CARE
6.1.
REPAIRING PUNCTURES AND OTHER DAMAGES
6.1.1. Use the
2” wide plastic tape to patch the
damaged section of the Cocoon Indoor.
a. Clean the surface of the damaged area
with damp cloth and allow the surface to
dry before applying the plastic tape.
b. Cut out a piece of tape enough to cover
the damaged area (outside surface) of
the Cocoon Indoor.
6.1.2. Protective maintenance:
a. Check the plastic tape occasionally and replace or re-patch if necessary.
6.2.
CLEANING THE Cocoon Indoor
6.2.1. If necessary, use with soap and water.
6.2.2. Air-dry.
6.3.
SAFEKEEPING
6.3.1. The empty Cocoon Indoor should be stored away from heat or direct sunlight and away from
rodent.
6.3.2. Do not place heavy objects on top of the liner to prevent damage.
6.4.
PLATFORM INSTALLATION OF RODENT GUARD (RG)
6.4.1. For protection against rodent attacks (one
set contains 4 pieces of rodent guard):
a. One set can be installed on any
platform legs with leg perimeter (round
or square) of 22 cm (9'') to 44 cm
(17'').
b. If the leg area is smaller, the rodent
guard can be optionally cut in half to
fit. Cut along the lines at the back of
the rodent guard.
6.4.2. Fold the rodent guard's teeth upwards
against the sides of the leg to keep it from
slipping.
