Grainfather Conical Fermenter, Instructions Manual

Page: 15 / 20

13.
SETTINGS SCREEN
This is where you can adjust the settings parameter. Use up/down buttons to navigate to the setting you
want to change, then press set to toggle to change. For the hysteresis, press Set to toggle to edit mode and
it will start flashing, then use up/down buttons to change value, then press Set again to toggle to edit finish.
In Settings you have options for:
• Units available: Metric/Imperial.
• Hysteresis (margin of temperature variation allowed before the temperature control turns back on):
0.1-2.0°C (32.2-35.6°F) adjustment .
• Mode: Heat/Cool (default), Heat Only, Cool Only, Off.
• Auto Proceed: The global setting is YES by default. If set to NO, upon completion of each step, it would
require you to manually proceed to the next step via the controller.
MENU SCREEN
This screen shows the main menu options:
• Profiles (or Profile Options if a profile is running).
• Settings.
Here you can use the up/down buttons to move the cursor, and press the Set button to select an option.