D/ESAM 820 User’s Guide
Alignment
•
Error! Main Document Only.-1
Alignment
Fader Alignment
Use the following procedure to align the Control Panel faders such that electrical
fader position matches physical fader position:
1.
Ensure that monitor levels for all channels are turned down.
2.
Take all faders and physically move them to their uppermost limit (+6
dB position). Leave each fader there.
3.
To align faders, press
LOCK/UNLK
, hold it down and press
FADER
SPLIT
. Electrical position now matches the physical scale printed on
the panel. This completes the fader alignment process.
Changing Input/Output Levels
The following topics are discussed in this section:
•
Analog Input Alignment, Assy. #04-0160-01
•
AES Input Module — installation and jumper settings
•
Audio Output Module
•
Meter Output Adjustments
•
Program Output Adjustments
•
Monitor Output Adjustments