background image

LX_FR587W-INS-LAB-RevH21 20

CARE AND MAINTENANCE

  WARNING: Inspect all components periodically and replace as needed.

EVERY THREE MONTHS

•  Check and clean casters.
•  Tighten bolts in each leg that secure caster into frame.
•  Check caster brakes.
•  Check and clean lock recline mechanism.
•  Check recliner mechanism for operation in all positions, including Trendelenburg Position, with 

assistant seated in recliner.

UPHOLSTERY MAINTENANCE AND STAIN REMOVAL

We recommend cleaning at least once a week to extend the lifespan of the upholstery. This 
prevents dirt and other contaminants from building up and stains from becoming permanent. If 
there is a spill, wipe off any excess right away with a dry cloth, making sure not to spread it all 
over the surface.
•  Clean the whole surface in circular motions using liquid hand soap (pH neutral) and water (1 

part soap to 9 parts water). Wipe with a clean damp cloth to get rid of any excess soap.

•  Repeat as needed and then let dry.

For Guardian, Patriot Plus, Renaissance and Savoy fabrics only

If there is any build-up that can’t be removed with soapy water, then use this as a last resort. 
Mixture: 1 part isopropyl alcohol to 1 part water.

Info: Using alcohol on a regular basis can affect the properties of the product.

•  Once a month, you can use a soft-bristle brush for a deeper cleaning.

Info: Light colors need more care, more often.
Info: The cleaning products recommended were used in a laboratory setting. Spradling Group

®

 

has no relationship with the manufacturers of those cleaning products.
Color Transfer

Certain clothing and accessory dyes (such as those used on denim jeans) may migrate to lighter 
colors. This phenomenon is increased by humidity and temperature and is irreversible. 

Check compatibility when using this product in combination with painted or varnished surfaces.

Disinfectants

In addition to cleaning, healthcare facilities maintain disinfecting regimens to reduce the spread 
of infections. There is a wide variety of available biocides that include bleaches, peroxides and 
quaternary ammonium products, among others. They should always be used at the recommended 
dilution, never in concentrated form. To prolong the life of coated fabrics, the disinfectants should 
be rinsed off after each use.

Info: Misuse of disinfectants is the major source of surface deterioration. Spradling International, 

Inc.

®

 continually evaluates cleaners/disinfectants, and  a list of those tested can be found on their 

website.

Summary of Contents for Lumex FR587W Series





























Reviews: