LX_574G-INS-LAB-RevE21 7
spring button
front frame hole
front caster
caster stem hole
rear frame hole
rear caster
assembly
Front Caster to Frame Assembly
Rear Caster to Frame Assembly
rear caster
attachment
hardware
rear caster
Secure Rear Caster
Front Caster to Frame Assembly
(Refer to Picture at Right)
WARNING: Perform the following step only
with assistance. Lifting the recliner alone could
cause personal injury.
1. Set the recliner upside down with the frame legs
facing up.
2. Insert fixed front caster assemblies into recliner
frame front legs until spring buttons pop out of
the openings on each side (as shown in Front
Caster to Frame Assembly).
Rear Caster to Frame Assembly
(Refer to Pictures at Right)
Tools required: two
7
/
16
" wrenches
1. Insert rear locking caster assemblies into rear
recliner frame, while aligning caster stem hole
and rear frame hole as shown at right, until holes
are aligned.
2. Secure rear caster attachment hardware from
outside of recliner through both rear frame and
both caster stems as shown.
3. User two
7
/
16
" wrenches to secure rear caster
attachment hardware.
WARNING: Perform the following step only
with assistance. Lifting the recliner alone could
cause personal injury.
Set the recliner right side up with the casters down.
The recliner is now ready for operation.
WARNING: Ensure the recliner is assembled
as described and all components are secure
before use.