HP_4E2-INS-LAB-RevA21 22
3.8 PERMANENTLY MOUNTED IV ROD
OPERATION
WARNING: PERSONAL INJURY HAZARD —
Ensure IV Rod is inserted completely into
socket up to the arrow before applying
any load.
3.8.1 Putting IV Rod in up position
1. Grasp IV Rod and rotate upward until it
stops.
2. Push down on IV Rod until it slides firmly
into the socket.
3.8.2 Extending IV Rod
1. Rotate screw collar, or large screw collar,
until loosened adequately to allow inner
tube to easily slide up or down within
outside tube.
2. Lift up on top of IV Rod until desired
height is achieved.
3. Tighten collar screw(s) until hand tight.
3.8.3 Retracting IV Rod
1. Support extended portion of IV Rod with
one hand.
2. Rotate screw collar until loosened.
3. Lower IV Rod until desired height is
achieved, then re-tighten screw collar.
4. Repeat process with second screw collar
as required.
Figure 3-30
STAINLESS STEEL
BAG HOOK
SCREW COLLAR
LARGE
SCREW COLLAR
OUTSIDE
TUBE
ROD
HINGE
