HP_4E2-INS-LAB-RevA21 16
3.5 STRETCHER TOP ADJUSTMENT
WARNING:
The lockout panel
deactivates both the patient pendant and
the control panel.
3.5.1 Hand Pendant Functions
Foot Section Adjustment
Raising:
Press the first button on the second
row of buttons on the pendant (Figure 3-8).
Hold until the desired angle is achieved.
Lowering:
Press the second button on the
second row of buttons on the pendant. Hold
until the desired angle is achieved.
WARNING: PERSONAL INJURY HAZARD —
Do not transport patient in chair
configuration (tipping may occur).
Do not sit or stand on foot section
(tipping may occur).
Back Section Adjustment
Raising:
Press the first button on the first row
of buttons on the pendant (Figure 3-9). Hold
until the desired incline is achieved.
Lowering:
Press the second button on the first
row of buttons on the pendant. Hold until the
desired recline is achieved.
Simultaneous Back and Foot Section
Adjustment
Raise Back Section / Foot Section:
Press the
first button on the third row of buttons on
the pendant. Hold until the desired angle is
achieved.
Lower Back Section / Foot Section:
Press the
second button on the third row of buttons
on the pendant (Figure 3-10). Hold until the
desired height is achieved.
Height Adjustment
Raising:
Press the first button on the fourth
row of buttons on the pendant. Hold until the
desired height is achieved.
Lowering:
Press the second button on the
fourth row of buttons on the pendant (Figure
3-11). Hold until the desired height is achieved.
Figure 3-10
Figure 3-9
Figure 3-11
Figure 3-8
