background image

GD_6700-6800-INS-LAB-RevA21 • Regency 6700 / 6800 User Manual 

10

4  HANDLING TIPS

The Gendron Regency 6700 / 6800 has been designed and engineered to perform as a stable 
and well balanced unit when used for its intended purpose. However, it is possible to tip the 
Regency 6700 / 6800 over if it is used improperly or if you move beyond the center of gravity. 
You may want to consider the use of a positioning belt, available from your distributor or 

www.grahamfield.com

, to maintain proper weight distribution. We urge you to learn the 

characteristics of your wheelchair. It is most important to learn safe methods to perform the daily 
activities basic to your lifestyle. Consult your medical professionals for assistance in developing 
the skills and proper techniques to perform all activities safely.

BALANCE

Proper balance is the key to maintaining the stability of your wheelchair. Reaching, bending, and 
transferring to or from a wheelchair will change your weight distribution and center of gravity. 
When performing such activities, do so as instructed in the following paragraphs to avoid tipping 
the wheelchair.

TRANSFER

  WARNING: Always ensure the wheelchair is on a stable, level surface before transfer.
  WARNING: Always engage wheel locks before transfer.
  WARNING: Do not step on the footplates; this could cause the wheelchair to tip. Fold them 

up, and either detach them, or swing them aside.

  WARNING: There is a critical moment when there is little or no seat platform beneath you. 

Take every precaution to reduce this unsupported distance before you attempt transfer.

                                

Patient Lift Transfer                                     Transfer Board Transfer

Transferring into or out of a wheelchair is a very difficult maneuver; always exercise extreme 
care even when transferring with the aid of an attendant, a patient lift (shown at above left), or 
a transfer board (shown at above right). Consult your medical professionals for assistance in 
developing your individual transfer technique. Engage both wheel locks and ensure the wheelchair 
is stabilized and will not move or slide during the transfer. Take extra precautions to prevent 
tipping. Use good body mechanics to prevent personal injury.

Summary of Contents for GENDRON 6700





























Reviews: