GD_6700-6800-INS-LAB-RevA21 • Regency 6700 / 6800 User Manual
15
ADJUST ARM POSITION
Tools required:
7
/
16
" wrench
To adjust the front-to-rear position, loosen the
two locknuts behind the clamp bracket (shown
at right), slide along the rail to the desired
position, and tighten the locknuts.
SWINGAWAY FOOTREST / ELEVATING LEGREST
Swingaway Footrest Elevating Legrest
WARNING: Avoid potential pinch points while swinging the Footrest or Elevating Legrest in
or out.
WARNING: The footplates' lowest point should be no closer to the ground than 2
1
/
2
inches,
to permit proper clearance.
WARNING: Do not stand on the footplates; this could cause the wheelchair to tip.
SWING FOOTREST / LEGREST AWAY FOR TRANSFER
1. Push swingaway release lever, at top of Footrest / Legrest, rearward; Footrest / Legrest will
swing outward.
2. Fold footplate upward and out of the way.
3. If wheelchair has Elevating Legrest, rotate calf pads upward 90° for transfer ease.
RETURN FOOTREST / LEGREST TO OPERATION POSITION
1. Rotate footplate downward, parallel with floor.
2. Swing Footrest / Legrest inward and lock it in place.
3. If wheelchair has Elevating Legrest, rotate calf pads downward 90° to occupy wheelchair.
WARNING: Ensure Footrest / Legrest extensions are locked in place, with footplates
rotated downward, before occupying or operating wheelchair.
LOCKED
UNLOCKED
Rail
Locknuts
