5 OPERATION INSTRUCTIONS
WARNING:
Ensure that the bed is secure and assembled properly per instructions in this
manual before operating.
WARNING:
Power Requirements: Electrical hazard may occur if this device is plugged
into inadequate power supply. A power source of 100-240 VAC, 50/60 Hertz with a capacity
of at least 3.9 Amperes must be available to operate the bed. A three wire grounded
receptacle must be supplied. A GFCI is recommended.
WARNING:
Ensure the control module and the handset cords are properly positioned
before operating the bed. Do not allow either of these cords to get caught in the moving
members of the bed. Ensure the control module and the handset cords are properly
positioned before operating the bed. Do not allow either of these cords to get caught in the
moving members of the bed.
WARNING:
Do not use a bed with any missing or damaged parts.
WARNING:
Do not operate this device if the power cord or any of the cords between the
control module and the associated parts are cut, frayed for loosely connected.
WARNING: Pinch points: Keep fingers, arms, legs, and objects clear of bed when any
mechanism is in motion. Ensure all persons and objects are clear of the bed when raising
or lowering. Do not place arms or head into frame while operating.
WARNING:
When the patient is lying on the bed in supine position, always lower the bed
completely and raise the side rails.
GD_3648-INS-LAB-RevA20 13
