Grafenthal RC-1716, User Manual

Page: 84 / 104

GRAFENTHAL GmbH - User Manual GRAFENTHAL ® RC
-1716 / -1916
84
3-in-1 HDDB-15 Cable Installation
Each computer port connector is HDDB-15 type. Inspect the 3-in-1 DB15 cable. It will have a
HDDB-15 male connector at one end. Plug it into computer port on the rear of KVM switch.
The other end of input cable has three connectors: a HDDB-15 male type for computer video,
a purple mini din 6-pin PS/2 connector for keyboard and a green mini din 6-pin PS/2 connector
for mouse. Plug these three connectors into the respective ports of computer. Repeat the same
procedure for all other computers.
a. PS/2 computer --- Plug PS/2 mouse connector to computer mouse port and PS/2 keyboard
connector to computer keyboard port. Do not hot plug PS/2 port. If you must do that make
sure PS/2 mouse first then the PS/2 keyboard.
Figure 2-4. 3-in-1 HDDB-15 Cable
b. USB computer --- Connect PS/2 connector of 3-in-1 HDDB-15 cable and USB adapter. Plug
USB connector to computer USB connector. This single USB connector can handle both
keyboard and mouse data, it work as a standard HID (Human Interface Device) no extra driver
needed.
Figure 2-5. 3-in-1 HDDB-15 Cable with USB Adapter
USB adapter