4
.
Fitting the installation kit
16
/
44
4.
Fitting the installation kit
1.
2.
Drill inlet and outlet on opposite sides with DN
110 core drill (diameter 124 mm).
Drill open the two DN 200 fittings with DN 160 core
drill (diameter 175 mm) or cut open with a jigsaw.
3.
4.
Deburr hole. Insert DN 110 edge seal. The drain
must run from the inside out.
Insert 160/110 reducer into DN 160 T-piece.
5.
6.
Fit T-piece with reducer on perforated filter pipe.
Fit 90° bend, DN 110 on filter pipe.
Upper half-shell
Upper half-shell
2 x
Upper half-shell
Summary of Contents for ANAEROBIX
Page 46: ...Notizen Notes Notas ...
Page 47: ...Notizen Notes Notas ...
Page 48: ...Notizen Notes Notas ...
