1
4
/
1
6
9
.
Installation of baffle
1. Put the sealing of the baffle in the lower side of
the baffle. The upper baffle part is smaller than
the lower part. So, the smaller part of the
sealing must be put on the upper part of the
baffle.
2
. Put the upper side of the baffle on the lower
side of the baffle. Connect with screws. Start
to tighten with the outside screws, go around
one by one to the middle.
3
. Put the sealing circumferentially in the baffle.
4
. Install the baffle in the lower Carat half shell.
Use
lubricant
on the lower part on the
baffle sealing before installing.
info
@graf
australia.com.au
www.graf
australia.com.au
5
. Lubricate
the sealing
with
soap
in the upper
side of the baffle.
6
. Continue assembling the tank according to the
installation instructions
(
section
5 of this manual)
.
