5
EN
Unpacking
To unpack the unit, proceed as below:
•
Take the unit out of the carton.
•
Remove all pieces of the packing.
•
Remove any possibly extant labels on the coffee grinder (do not remove the rating plate).
Requirements for the installation location
For safe and flawless operation of the unit, the place of location must meet these prerequisites:
•
The unit must be set up on a firm, flat, level, non-slip and heat resistant base that has sufficient load
bearing capacity.
•
Select the place of location so that children cannot reach the hot surfaces of the unit.
•
The unit is not intended for installation in a wall or a built-in cupboard.
•
Do not set up the unit in a hot, wet or moist environment.
•
The electric socket must be readily accessible so that the power cord can be easily unplugged.
Operating and speed settings
•
Maximum operating time is 4 minutes. After these 4 minutes please let the appliance cool down to
room temperature and start again.
Grind setting
You can influence the composition of the coffee with various grind settings.
The wide range of grind settings lets you make a precise adjustment.
Please observe the instructions below when using the coffee grinder.
The finer the grind, the longer the grinding process takes.
•
If you use a fine grind level, it is possible that the coffee sticks together. During grinding, knock on
the coffee bean container cover so that any possible coffee bean clumps do not block the grinding.
