3 0 0 M
A R L I N
8–5
Should the high bilge water alarm activate, immediately investigate to determine the source of
water entry. Also, confirm your bilge pumps are working properly. If the situation cannot be
quickly resolved, contact your dealer and remove the boat from the water. See
“12 Volt DC High
Bilge Water Alarm Diagram” on page 8–44
for wiring detail.
W
INDSHIELD
W
ASHER
S
WITCH
A valve located in the forward wall of the deckwing controls your windshield washer. Water
will be sprayed on the windshield, by opening this valve with the Fresh Water System pressurized.
To pressurize, locate the water pressure switch on your boat’s DC panel, and place it in the “on”
position.
H
EAD
S
HOWER
The water pressure switch located on the DC panel activates the head shower. After turning
this switch to the on position, the shower water flow can be controlled by the head shower fixture.
C
OCKPIT
S
HOWER
To operate the cockpit shower, the water pressure switch located on the DC panel must be in
the on position. Open the cover and pull the shower wand from the recessed deck fitting. Depress
the button on the back of the wand to spray water. To reinstall the shower wand into the recessed
fitting, gently feed the hose down through the deck and replace the cover on the fitting. The water
pressure pump is located forward of the starboard tackle box in the cockpit bait station. Reference
“Pressurized Fresh Water System” on page 8–25
for a layout diagram.
AUDIBLE
ALARM
ON
HIGH BILGE WATER ALARM
AUDIBLE
ALARM
OFF
TEST