manualshive.com logo in svg

Grady-White Boats Marlin 300, Owner'S Manual, Page: 78 / 112

Share
Download
Grady-White Boats Marlin 300 Owner'S Manual Download Page 78

3 0 0   M

A R L I N

8–18

 3. Use the AM/FM buttons to scroll through the option until “ESN XXXXXXXXXXXX” 

appears.

 4. Write the number down and press MENU to exit.

For more information, refer to the tuner’s owner’s manual and quick start guide included in

your owner’s packet.

TV/DVD

The television is a 15” flat screen LCD unit with speakers across the bottom. It is located in a

separate TV cabinet near the forward vee berth. An A/B switch located on the bottom of TV
cabinet is used to change between broadcast antenna and dockside cable reception. When the
switch is set to A, the TV receives a signal from the broadcast antenna. Set the switch to B when
connected to dockside cable. The DVD/CD is a separate unit located in the TV cabinet below the
television. Both receive power from the fuse block located behind the TV cabinet. An auxiliary
audio/video input panel is also part of the TV system. This panel allows for external devices such
as gaming systems to be connected to the TV using standard RCA cables.

Summary of Contents for Marlin 300

















































































































Reviews:

No comments