Grady-White Boats Freedom 325, Owner'S Manual, Page: 69 / 80

8-17
Chapter 8: Freedom 325
Overboard Discharge
1. Open the discharge seacock by pulling up on its remote seacock arm located in the port
console. This seacock must be open prior to discharge to prevent damage to the
discharge pump.
2. Place the “Head” and “Head Discharge” switches on the DC panel to the “on” position.
3. Engage the pump using the key switch in the holding tank monitor panel. Turn the switch
to the “start” position. The discharge pump will run until the panel indicates the tank is
empty. Turn the key to the off position.
4. Close the discharge seacock by pushing down on its remote seacock arm.
N OT I C E
Overboard discharge seacock must be secured in the closed position in accordance with the
laws in your boating area.
Windshield Washer
The wiper switch located on the helm switch panel controls your windshield washer. Water may
be sprayed on the windshield by pressing the wiper switch to the down position with the freshwater
system pressurized. To pressurize, place the freshwater switch on the helm switch panel to the “on”
position. Both wipers will operate and both washers will spray until the wiper switch is turned off.