F
I S H E R M A N
2 0 9
8–5
B
ILGE
P
UMP
/F
LOAT
S
WITCH
Your boat is equipped with an automatic float switch adjacent to the bilge pump. This switch
will enable the bilge pump to come on automatically if a significant amount of water accumulates
in the bilge. This switch is wired directly to the battery. The battery must be in good condition to
ensure proper operation. The pump is also equipped with a switch at the helm. When the helm
switch is in the “on” position, the pump will run continuously. When the switch is in the “off”
position, the pump is off unless activated by the float switch.
B
ILGE
P
UMP
L
OCATION
The bilge pump is located under the access plate in the motorwell, just forward of the transom.
C
OMPASS
The compass is located at the helm station in direct view of the operator when navigating the
boat. Following the instructions in the compass manual included in the “Owners Packet,” you
may make compensation adjustments.
M
AIN
C
IRCUIT
B
REAKER
There is a 40 AMP circuit breaker located in the aft starboard rigging compartment. This is the
main breaker protecting the wiring supplying power to the helm switch panel. If this breaker is
tripped, depress the red button on the breaker box to reset it.
C A U T I O N
To prevent damage to the bilge pump, do not run it dry for a prolonged period of time.
!
Summary of Contents for Fisherman 209
