G
A U G E S A N D
S
W I T C H E S
5–2
• Overheat Warning Indicator
This feature indicates when the temperature of the cooling water circulating through the
engine is too high. When the temperature exceeds the recommended operating range indicated
by your engine owner's manual, immediately shut off your engine to prevent damage.
Overheating is often caused by obstruction of your engine's intake on the lower unit. Check
the intake strainer first if you experience trouble.
• Speedometer
This feature indicates boat speed in miles per hour, knots per hour, or nautical miles per hour.
• Trip Meter
This feature indicates the distance traveled since the meter was last set.
• Hour Meter
This feature records the cumulative number of hours the motor has been in use.
D
IGITAL
T
ACHOMETER
• Oil Level Warning Light
Refer to your engine owner's manual for information regarding oil level and the warning light.
• Revolutions Per Minute (RPM's)
Consult your engine owner's manual for the recommended operating RPM range.
• Trim
This feature indicates the angle of thrust of the lower unit of the engine.
D
IGITAL
F
UEL
M
ANAGEMENT
G
AUGE
• Economizer
The economizer feature on the fuel management gauge gives readings in gallons per hour and
miles per gallon.
• Synchronizer
The synchronizer tells the operator when the engines are running at the same RPMs.
• Totalizer
The totalizer feature displays the amount of fuel consumed since it was last set. To reset the
totalizer, press the SET and MODE buttons together.
The digital fuel meter can display information for the port side only, the starboard side only,
and then a total consumption. For more detailed information, refer to engine owner's manual.
