Assembling the dolly:
Rotate the outside legs into position, and secure by
tightening the locking knob
1
. When collapsed, use
the handle
5
for transport.
Locking the wheels:
Use the brake tabs
3
to lock and unlock the wheels.
Mounting your tripod:
1. Remove your Magnus tripod’s rubber feet if
they’re attached. Then, fit the slot in the tripod’s
spiked feet onto the leg supports
2
. You may need
to adjust the tripod’s leg length or spreader angle
to properly fit the tripod feet into the leg supports.
2. Pull the locking straps
4
onto the notches on the
outer edges of the tripod feet.
Using Your DSF-132 Dolly