2
Introduction
Thank you for choosing Impact.
Congratulations on your purchase of an Impact 50×50 or 50×70 cm softbox.
These softboxes are compatible with the Impact FF-S1 and FF-S4 Fluorescent
Fixtures, as well as the SF-ABRL160 Slave Flash. Their silver interior and front
diffusers are ideal for situations where softening the light is desired. These
softboxes are for use with fluorescent, LED, or flash only. They should not be
used with hot lights.
Assembling these softboxes can be simple if you follow these instructions
carefully.
There are four parts to your Impact 50 or 70 cm Softbox kit:
• The softbox skin
• Front diffuser
• Four flex rods
• Carry bag
The instructions in this manual use an FF-S1 Fluorescent Fixture to demonstrate mounting
a 50×50 cm softbox. The 50×70 cm softbox assembles by the same method. All photos in
this manual are for illustrative purposes only. Light stands, light fixtures, and bulbs are not
included with Impact softboxes unless purchased as a kit.
Model FF-SB50 shown
