11
Composite Video Input
: To use your FieldVision 4KV2 as a
wired standard-definition video monitor, you’ll need an A/V
breakout cable (available separately).
1. Insert the 1/8
″
(3.5 mm) plug into the A/V input on the
side of the monitor.
2. Connect your composite video source to the yellow RCA
jack.
3. If desired, connect your audio source to the white (L) and
red (R) audio jacks.
4. Press the Mode button to cycle through the input modes
until AV appears on the monitor. If your composite video
source is sending a signal to the monitor, the image will
appear on-screen, and the power indicator LED will glow
green.
If your video source is not connected, the screen will display a
no-signal message.
Note: When using the composite video input, your audio
source must be plugged into the FieldVision
4KV2
’s
composite audio input in order to monitor the sound.
To turn the screen off, press the power button. The screen will
go black, and the indicator LED will glow red to show that the
power is on and the screen is in sleep mode.
Summary of Contents for Elvid FieldVision 4KV2
Page 1: ...USER MANUAL FIELDVISION OCM 7B 4KV2 7 4K IPS Monitor ...
Page 2: ...2 ...