Repair
3A2798D
17
Repair
Disconnect Pump from Platen
1.
Loosen two thumb screws (412) from platen.
2.
Carefully pull pump away to prevent damage to
pump inlet. Remove adapter (421) and o-ring (406)
from platen adapter (421).
Connect Platen to Pump
1.
Apply grease to o-ring (406) then install the o-ring
on platen adapter (421). See F
IG
. 15.
2.
Apply pipe sealant to pump inlet thread then thread
onto adapter (421).
3.
Loosen thumb screws (412) then carefully lower
pump onto platen.
4.
Tighten thumb screws (412) to secure platen to
adapter.
Remove Wipers
See
Remove and Reinstall Wipers
on page 13.
Install Wipers
See
Remove and Reinstall Wipers
on page 13.
F
IG
. 15
406
421
412
ti20254b
Summary of Contents for Xtreme PFP 16P957
Page 33: ...Notes 3A2798D 33 Notes...
