Appendix C - ADM Run Screens Overview
313875J
65
Appendix C - ADM Run Screens Overview
Run Screens Navigation Diagram
Home Screens
The Home screen is the first screen that displays when
the machine is started and when switching from the
Setup screens to the Run screens. The Home screen
shows the current fluid pressure at the pump outlets.
The operating mode can be selected from the Home
screen. The available operating modes are Operator,
Sequence, Shot, Standby, Night, and Disabled.
System Off
This operating mode is only used at initial startup and
when
is
pressed.
Disabled
In Disabled mode, machine operation is disabled and
the setup screens cannot be accessed.
Standby
In Standby mode, the user can park the pumps, perform
a base purge, and close the dispense valve. See
on page 45 for base purge and parking the
pumps procedure.
Maintenance
Home
Events #1
Events #2
Events #...
Errors #1
Errors #2
Errors #...
Optional:
Diagnostic
Summary of Contents for VPM 12
Page 9: ...A Red and B Blue Components 313875J 9...
Page 50: ...Maintenance 50 313875J...
