Installation
6
308345T
Installation
Key:
SV:
Bleed-type air shutoff valve
AF:
Air line filter
AR:
Air regulator and gauge
AL:
Air line lubricator
AM:
Agitator motor
MT:
Mix tank (reference only)
Grounding
Check your local electrical code for detailed grounding
instructions for your area and type of equipment.
To ground the Twistork Helix agitator, connect the
ground wire (H) to the grounding lug (J) on the collar.
Connect the grounding wire clamp to a true earth
ground. See F
Order part number 222011, ground wire and clamp.
F
IG
. 4: Ground the Agitator
To reduce the risk of fire and explosion, always
maintain a minimum of 1 in. (25.4 mm) clearance
between rotating agitator parts and container to
prevent sparks from contact.
F
IG
. 3: Typical Installation
AM
SV
AL
MT
AR
AF
The equipment must be grounded to reduce the risk
of static sparking. Static sparking can cause fumes to
ignite or explode. To reduce the risk of static sparking,
all electrically conductive objects or devices in the
spray area must be properly grounded.
NOTICE
The bearing nut (8) is made of acetal, which is not
compatible with some of the solvents used in paints or
coatings and is not compatible with acidic fluids and
will be damaged by them. Order part number 189660,
optional Rulon
®
bearing nut. Check your material data
sheet and/or supplier for compatibility.
J
H
