Graco Twistork Helix 308345T, Instructions - Parts Manual

Page: 18 / 22

Parts
18 308345T
Parts
Model 236629 Standard Agitator
Model 236760 Oil-less Reversible Agitator
11
24
25
24
25
4
27
41
5
22
6
3
39
32
34
33
50
45
20
44
46
7
Press into place; lips face down.
Apply high-strength thread sealant to
threads.
Apply anaerobic PTFE pipe sealant to
threads.
With helix tube (7) flush with top of
bushing (14), torque oppositely and evenly
to 55 to 60 in-lbs (6.2 to 6.8 N
•
m).
Tighten after you align pulleys (12 and 13).
Torque setscrew to 45 to 55 in- lbs (5.1 to
6.2 N•m).
Drive belt must not be tight after it is
installed.
Bend washer tab up to lock.
Apply PTFE spray lubricant to inside lip of
bearing nut before you install it.
Torque oppositely and evenly to 80 to 100
in-lbs (9 to 11.3 N•m).
Torque oppositely and evenly to 60 to 70
in-lbs (6.8 to 7.9 N•m).
Apply PTFE spray lubricant to siphon tube
(4) inlet end and to top 6 in. (150 mm) of
helix tube (7) before you install them.
Install flush with top of nut (8), and torque
to 40 to 45 in-lb (4.5 to 5.1 N•m).
Install with outer lips facing up. See F
IG
. 9
on page 14.
1
2
3
4
5
6
7
8
9
10
11
12
13
12
12a
27
1
30
26
18
16a
51
16 or 17
15
28
29
31
35
14
13
14a
30
10
21
11
9
11
2
8
56
3
3
3
3
See detail
1
3
3
2
4
Needle Valve (Ref. 18) Detail
51
3
18e
18f
18d
18a
18b
18c
Includes items 18a to 18e
10
9
13
7
5
6
12
8
11