![background image](http://html1.mh-extra.com/html/graco/toughtek-f340e/toughtek-f340e_operation-repair-and-parts_2253062010.webp)
Grounding
10
3A6393D
Grounding
Ground the sprayer by plugging it into an outlet that is
properly installed and grounded in accordance with all
local codes and ordinances. Do not modify the power
cord provided; if it does not fit the outlet, have the proper
outlet installed by a qualified electrician.
Extension Cords
•
Use only a 3-wire extension cord that has a
grounding plug and a grounding receptacle that
accepts the plug on the product.
•
Make sure your extension cord is not damaged. If
an extension cord is necessary, use 12 AWG (2.5
mm
2
) minimum to carry the current that the product
draws.
•
An undersized cord results in a drop in line voltage
and loss of power and overheating.
NOTE:
Certain GFCI outlets have been known to trip
while using this product. GFCI outlets have a range of
sensitivities. Motor controllers can cause false trips of
GFCI outlets. If you experience issues while using this
product, switch to a different GFCI model.
Power Requirements
NOTE:
Models with an air compressor require an
additional dedicated 15 A circuit (120 V systems) or
8.5 A circuit (230 V systems).
The equipment must be grounded to reduce the risk
of static sparking and electric shock. Electric or static
sparking can cause fumes to ignite or explode.
Improper grounding can cause electric shock.
Grounding provides an escape wire for the electric
current.
Model
Required
Power Source
Power
Cord Connectors
Supplied
Local Adapters
200–240 VAC, 1
phase, 50/60 Hz
One separate, dedicated
circuits rated at minimum
of 10 A each
One IEC 3-20 C20
Plugs
Euro CEE7 (Europe)
AS/NZS (Australia)
100–120 VAC,
50/60 Hz
One separate dedicated
circuits rated at minimum
of 15 A each
One NEMA 5–15A
Plug