![background image](http://html1.mh-extra.com/html/graco/therm-o-flow-194485/therm-o-flow-194485_instructions-parts-list-manual_2251189008.webp)
8 310538
Installation
Connect Air Lines to Dispense Valve
CAUTION
Only use air fittings that are rated at a temperature
equal to or higher than the operating temperature of
your fluid dispensing system. Lower rated air fit-
tings could melt and cause damage to the automat-
ic dispense valve.
These valves are air to open and air to close with a
spring to bias them closed. Use a 4–way exhausting
solenoid to operate these valves.
Making sure to connect the appropriate air lines to the
appropriate ports (see Fig. 5), securely connect air
lines to dispense valve air ports (G).
Connect Material Hose to Dispense Valve
Securely connect the material hose to the dispense
valve material inlet port (A). See Fig. 5.
Connecting Electrical Cable to Dispense
Valve
Connect electrical cable plug from your Therm–O–
Flow or Therm–O–Flow Plus hose or control.
Fig. 5
A
1/2” npt
G
360
open
close
1/8” npt
1/8” npt
Snuff–Back Valve Shown
Summary of Contents for Therm-O-Flow 194485
Page 46: ...46 310538 Notes...