9
309916
Engine Maintenance
Changing Engine Oil
WARNING
Page 6
1.
Relieve Pressure
, page 6.
2. Remove compressor power pack, page 7.
3. Place a suitable container to catch the used oil
below the compressor power pack.
4. Remove drain bolt and filler cap/dip stick. Fig. 8.
Fig. 8
Drain Bolt
Filler Cap/
Dip Stick
ti4249a
5. Tip unit to drain the used oil out of unit. Fig. 9. .
Fig. 9
ti4250a
6. Reinstall drain bolt. Tighten securely. Fig. 8.
7. Place the compressor power pack on a level
surface. Fill to the outer edge of the oil filler hole
with SAE 10W--30 oil. The engine oil capacity is
0.63 qt (0.60 liters). (Refer to the Honda Engines
Owner’s Manual for recommended oil weight.)
8. Reinstall the filler cap/dip stick. Tighten securely.
NOTE:
Running engine with a low oil level can cause
engine damage. The Oil Alert
r
system will automati-
cally stop the engine before the oil level falls below the
safe limit. However, to avoid the inconvenience of an
unexpected shutdown, fill to the upper limit and check
oil level regularly.
9. Reinstall compressor power pack on sprayer, page
8.
For all other engine maintenance, troubleshooting, and repair, see Honda Engines Owner’s Manual.
