manualshive.com logo in svg

Graco ST MAX II 395 PC Pro, Operation, Parts, Page: 59 / 64

Share
Download
Graco ST MAX II 395 PC Pro Operation, Parts Download Page 59

Technical Specifications

3A6491E

59

Width

Stand

14 in.

35.6 cm

Lo-Boy (490/495/395EU/595)

20 in.

50.6 cm

Lo-Boy (650)

22.5 in.

57 cm

Hi-Boy

20.5 in.

52.1 cm

Weight

Stand

395EU

45.1 lb.

20.5 kg

490 / 495

34 lb.

15 kg

Lo-Boy

395EU

63 lb.

29 kg

490 / 495

59.1 lb.

26.8 kg

595

70 lb.

31.8 kg

650

77 lb.

34.9 kg

Hi-Boy

395EU

66 lb.

30 kg

490 / 495

66.1 lb.

30 kg

595

73 lb.

33 kg

650

75 lb.

34 kg

Noise** (dBa) 

@ 70 psi (0.48 MPa, 4.8 bar)

Sound pressure

90 dBa 

Sound power

100 dBa

Materials of Construction

Wetted materials on all models

zinc- and nickel-plated carbon steel, nylon, stainless steel, PTFE, 

acetal, leather, UHMWPE, aluminum, tungsten carbide, 

polyethylene, fluoroelastomer, urethane

Notes

* Startup pressures and displacement per cycle may vary based on suction condition, discharge head,

air pressure, and fluid type.
** Sound pressure measured 3 feet (1 meter) from equipment.

Sound power measured per ISO-3744.
All trademarks or registered trademarks are the property of their respective owners.

490/495/595/650/395EU

US

Metric

Summary of Contents for ST MAX II 395 PC Pro

































































Reviews:

No comments