Graco SaniForce SDU Series, Instructions - Parts Manual

Page: 27 / 30

Technical Specifications
3A0591ZAG 27
Technical Specifications
Maximum Fluid Working Pressure
5:1 Ratio Piston Pumps 410 (2.8 MPa, 28.3 bar)
6:1 Ratio Piston Pumps 650 (4.5 MPa, 44.8 bar)
12:1 Ratio Piston Pumps 1450 (10 MPa, 100.0 bar)
Maximum Package Air Inlet Pressure
Piston Pump Ram Packages 100 psi (0.7 MPa, 6.9 bar)
Maximum Ram Air Inlet Pressure 100 psi (0.7 MPa, 6.9 bar)
Maximum Pump Air Inlet Pressure
6:1 and 12:1 Ratio Piston Pumps 100 psi (0.7 MPa, 6.9 bar)
5:1 Ratio Piston Pumps 80 psi (0.6 MPa, 5.5 bar)
Maximum size pumpable solids
5:1 and 12:1 Ratio Piston Pumps 1/4 in. (6.4 mm)
6:1 Ratio Piston Pumps 1/8 in. (3.2 mm)
Maximum Ram Package Operating Temperature
5:1 Ratio Piston Pump Ram Packages
All Other Ram Packages 140°F (60°C)
150°F (66°C)
Maximum Drum ID 24 in. (61 cm)
Minimum Drum ID
Straight-Sided Drum 19.4 in. (49 cm)
Tapered Drum 19.0 in. (48 cm)
Maximum Drum Height 40.75 in. (104 cm)
Sound Data See your pump manual.
Wetted Parts
Inflatable Seal Neoprene
Ram (plate, fittings, gaskets) 300-Series Stainless steel, Buna-N, and Polypropylene
5:1 Ratio Piston Pumps ( see pump manual ) Stainless steel, Buna-N, FKM, PTFE and UHMWPE. Priming
piston pumps also have Polychloroprene and Nylon. Model
24F197 also has Silicone.
6:1 Ratio Piston Pumps ( see pump manual ) Stainless steel, Buna-N, Polychloroprene, Nitrile, Nylon, and
UHMWPE. Certain models have PTFE packings.
12:1 Ratio Piston Pumps ( see pump manual ) Stainless steel, Acetal, Nitrile, PTFE, UHMWPE