Installation
332134A
3
5.
Supply the gun solenoid with a 24 VDC signal.
NOTE:
The 24 VDC will be used to trigger the gun.
6.
Connect an air source to the gun manifold.
7.
Connect the air lines from the gun manifold to the air
cylinders. Refer to
, page 4, for pneumatic
connections.
3/8” Tube Fitting
NOTICE
To avoid damage, route all air lines so they do not
become pinched during normal machine operation.
NOTICE
The regulator is factory preset to 40 psi (280 kPa,
2.8 bar) and should not require adjustment. Exceed-
ing this value may damage the RS gun.
