![background image](http://html.mh-extra.com/html/graco/roadlazer-roadpak-24g677/roadlazer-roadpak-24g677_operation_2250958010.webp)
Setup
10
3A1214D
RoadPak Mounting Bracket (24G627)
Installation (Option 2)
NOTE:
Cutting the RoadPak mounting arms and bolting
them through the bed to the frame of the vehicle is an
option in addition to the following mounting techniques:
Narrow Orientation
1. Slide the RoadPak mounting arms (304) between
the two fork lift channels in the frame.
2. Depending on where the RoadPak is located on the
vehicle determines which holes to bolt through on
the RoadPak frame. There are 8 possible mounting
holes for each mounting arm. Fasten to at least two
holes on each side.
3. Hand-tighten bolts (312), nuts (315), and washers
(307) to mounts.
ti16441a
ti16661a
ti16656a
ti16917a
304
ti16659a
ti16660a
315
312
307