background image

Side mesh

panel

Canopy mesh

Front mesh

panel

5

364-4-98 

6

8

7

To Set Up and Use Your Canopy

When properly used, the canopy provides shade for your

child. However, your child may be warmer inside the play

yard than in a shaded area outside the play yard.
To help prevent build-up of heat inside the play yard and to

avoid over-heating your child:

!

Turn canopy mesh away from the sun. Keep entire 

mattress shaded from sunlight at all times.

!

Keep play yard well ventilated:

!

Always keep the front mesh panel and one side mesh 

panel of the play yard open.

!

Never cover the canopy mesh.

!

Never use canopy with an add-on bassinet in the 

play yard.

As always, use good judgment to protect your child from

exposure to heat which can lead to serious injury or death.
NEVER leave your child unattended.

ALWAYS keep your child in view.

Side mesh

panel

Canopy mesh

Front mesh

panel

Step 1.

Unfold the tubing and slide

the three sections together to

form one long tube. The

elastic cord in the tubing will

hold the pieces together.

Step 2.

Slide the long tube into the

tunnel in the canopy until

both ends stick out of the

tunnel 3 or 4 inches. The

tunnel is on the shiny side

near the netting.

Step 3.

Push the tube ends into

the corner brackets on the

Pack ’N Play. Tube end caps

will snap into place in the

brackets.
NOTE: The mesh side of 

the canopy goes on the 

same side of the unit as the

brackets. The shiny side 

goes on the inside of the unit.

To remove canopy, first 

grasp tube firmly 

so that it

will not spring out. Then push

in on end caps to release

them from brackets and pull

tube ends up. 

Step 4.

Pull the back corners of the

canopy over the back corners

of the Pack ’N Play and fasten

the 

VELCRO

®

squares located

on the ends of the top rail and

back corners of the canopy.

Canopy

Tubing

Accessory Features

BACK FLAP:

You can raise back flap if

desired.
Unfasten 

VELCRO

®

straps at

bottom of flap. Roll flap up.
Fasten in place with snap

loops at top.

TOY BAG:

Toy bag snaps on end of 

unit. Maximum weight 2 lbs

(0.9 kg).
DO NOT machine wash or dry

in a dryer. DO NOT dry clean.

Spot clean with a damp cloth

and a mild detergent. NO

BLEACH.

WHEELS:

To apply the wheel locks,

push DOWN on the lever.
To release the wheel locks, lift

UP on the lever.

Step 5.

To help prevent build-up of heat inside the play yard

and to avoid over-heating your child:

!

Turn canopy mesh away from the sun. Keep entire

mattress shaded from sunlight at all times.

!

Keep play yard well ventilated:

!

Always keep the front mesh panel and one side 

mesh panel of the play yard open.

!

Never cover the canopy mesh.

Maintenance of Canopy:

DO NOT machine wash or dry in a dryer. 

DO NOT dry clean. Spot clean with a damp cloth and 

a mild detergent. NO BLEACH.

Push in, then up

Step 4.

Hold one end of the unit up and

push the center of the floor

down.
At first your Pack ’N Play 

may

be like a new pair of shoes. 

You may need to break it in by

slightly stretching the netting

and fabric. If the center does not

stay down, place some weight

(several books) in the center of

the unit and let it stand

overnight.

Step 5.

Do not use your Pack ’N Play

without the mattress provided

by Graco.

Place the mattress into your 

unit with padded side up.
Always use your unit with 

mattress installed soft side up.
Slide the two 

VELCRO

®

straps

through slots in bottom of 

Pack ’N Play and fasten to 

VELCRO

®

on underside. This will

prevent mattress from moving.
Make sure the mattress is

installed properly before 

placing your child in the Pack ’N

Play.
Your Pack ’N Play is ready to

use.

Reviews: