308–610
Rev. A
INSTRUCTIONS-PARTS LIST
INSTRUCTIONS
This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
See manual 308–341 for complete gun
warnings and instructions.
Optimiser 2K
Upgrade Kit
Part No. 238–216
For use with the Optimiser 2K
Spray Gun, Part No. 949–239
Pressure Relief Procedure
WARNING
PRESSURIZED EQUIPMENT HAZARD
The equipment stays pressurized until pressure is
manually relieved. To reduce the risk of serious
injury from pressurized fluid, accidental spray from
the gun, or splashing fluid, follow this procedure
before cleaning or servicing the gun and whenever
you are instructed to relieve pressure.
1.
Close the adhesive and activator shut-off valves.
2.
Trigger the gun into the spray booth* to relieve the
fluid pressures and clear excess activator from the
gun.
*
If the gun has been flushed with solvent, be sure to
spray the solvent into a grounded metal waste con
-
tainer.
3.
Close the atomizing air shut-off valve.
GRACO INC.
P.O. BOX 1441
MINNEAPOLIS, MN
55440–1441
COPYRIGHT 1995, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
