Graco Matrix 249269 Instruction Manual Download

Page: 11 / 12

Technical Specifications

311002C

Technical Specifications

Operating temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32° F to 120° F (0° C to 49° C)

Storage temperature range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -30° F to 120° F (-34° C to 49° C)

Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . rechargeable nickel-metal hydride 9.6 VDC

Battery storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50° F to 86° F (10° C to 30° C)

RF Communication . . . . . . . . . . . . . . . . . . . . . 902-928 MHz frequency hopping, spread-spectrum (N.A.)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 915-928 MHz frequency hopping, spread-spectrum (Australia)

Unobstructed RF Communication Range (based on building construction and RF environment) . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300-500 ft (91.0-152.0 m)

Obstructed RF Communication Range (based on building construction and RF environment) . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250-300 ft (76.2-91.0 m)

Conformity (for 249880, Australia) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ACMA (Australia)

Approvals (for 249269 N.A.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FCC, Industry Canada (IC)

Dimensions

12.0 in. (304.8 mm) overall length

4.75 in. (120.6 mm) overall width

5.25 in. (133.3 mm) overall height

TI6745

Summary of Contents for Matrix 249269












