background image

Limited Warranty 

16

309863A

Limited Warranty

Graco warrants to the original purchased (other than for purposes of resale or rental) all equipment manufactured by Graco and bearing its name 
to be free from defects in material and workmanship if operated in accordance with Graco’s printed recommendations and instructions. This 
warranty applies for one year from the date of purchase.

This warranty does not cover and Graco shall not be liable for general wear and tear, or any malfunction, damage, or wear caused by improper 
use, accidents, user negligence, use of non-Graco component parts or service or repair performed by anyone other than a Graco authorized 
service center.

IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE 
YEAR FROM THE DATE OF ORIGINAL PURCHASE.

GRACO SHALL NOT IN ANY EVENT BE LIABLE FOR INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE OR EXPENSE OF 
ANY KIND, WHETHER FROM BREACH OF THIS WARRANTY OR ANY OTHER REASON. Some states do not allow the exclusion or limitation of 
incidental or consequential damages, so the above limitation or exclusion may not apply to you.

To make a claim under this warranty, return the product with proof of purchase, transportation prepaid, to any Authorized Graco Service Center. 
Graco’s Authorized Service Center, at its option, will either repair or replace the product and return it to you, postage, prepaid. To find the nearest 
Graco Authorized Service Center call 1-888-541-9788 or visit our website at www.Graco.com

This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.

All written and visual data contained in this document reflects the latest product information available at the time of publication. 

Graco reserves the right to make changes at any time without notice.

Sales Offices:

 Minneapolis, Detroit

International Offices:

 Belgium, Korea, Hong Kong, Japan

PRINTED IN USA 309863 3/2003

Summary of Contents for Magnum TexFinish 246186

















Reviews: