background image

 Form No. 309226

Rev. A

This manual contains service

instructions only.  See manual

309316 Operators Quick Guide and

309225 Operating Instructions for

complete operating instructions.

M

AGNUM

 XR9

Model 232750

M

AGNUM

 XR7

Model 232745

M

AGNUM

 XR5

Model 232740

9558A

9559A

M

AGNUM

 DX

Model 232735

M

AGNUM

 DX, Model 232735, Series A

0.24 gpm (0.91 lpm) stand–mount sprayer, 25 ft (7.6 m)
3/16” hose and SG1

t

–EF spray gun with reversible spray

tip and guard.

2800 psi (19 MPa, 193 bar) Maximum Working Pressure

M

AGNUM

 XR5, Model 232740, Series A

0.27 gpm (1.02 lpm) stand–mount sprayer, 25 ft (7.6 m)
1/4” hose and SG1–EF spray gun with reversible spray tip
and guard.

3000 psi (21 MPa, 207 bar) Maximum Working Pressure

M

AGNUM

 XR7, Model 232745, Series A

0.31  gpm (1.17 lpm) stand–mount sprayer, 50 ft (15.2 m)
1/4” hose and SG2

t

 metal spray gun with reversible spray

tip and guard.

3000 psi (21 MPa, 207 bar) Maximum Working Pressure

M

AGNUM

 XR9, Model 232750, Series A

0.38 gpm (1.44 lpm) stand–mount sprayer, 50 ft (15.2 m)
1/4” hose and SG3

t

 pro metal spray gun with reversible

spray tip and guard.

3000 psi (21 MPa, 207 bar) Maximum  Working Pressure

9558A

Service Instructions

INSTRUCTIONS

This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.

Airless Sprayers

t

GRACO INC.

P.O. BOX 1441

MINNEAPOLIS, MN

55440–1441

E

COPYRIGHT 2001, GRACO INC.

Graco Inc. is registered to I.S. EN ISO 9001

Summary of Contents for Magnum DX 232735































Reviews: