Graco Lube Master, Instructions Manual

Page: 42 / 44

Technical Specifications
42 3A2781B
California Proposition 65
Motors (56 C-face)
115/230 V 1/2 hp single phase 60 Hz 1725 RPM, T.E. Full load run-
ning current 115 V, 7.4 A; 230 V, 3.7 A. Inrush at 115 V 49 A; 230 V
24.5 A.
230/460 V 1/2 hp three phase 60 Hz 1725 RPM, T.E. Full load run-
ning current 230 V, 2 A; 460 V, 1 A. Inrush at 230 V 12.2 A; 460 V
6.1 A.
115/230 V 1/2 hp single phase 60 Hz 1140 RPM, T.E. Full load run-
ning current 115 V, 7.8 A; 230 V, 3.9 A. Inrush at 115 V 49 A; 230 V
24.5 A.
230/460 V 1/2 hp three phase 60 Hz 1140 RPM, T.E. Full load run-
ning current 230 V, 2.4 A; 460 V, 1.2 A. Inrush at 230 V 12.2 A;
460 V 6.1 A.
Sound pressure level
(measured at 0.5 m from unit)
89.0 dB(A)
* These recommended operating temperatures are based on materials used in construction of the pump and
reservoir only.
** The grease must be pumpable at the lowest anticipated operating temperature.
Lube Master® Floor Mount or Wall Mount Pump Package
US Metric
WARNING: This product can expose you to chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information, go to
www.P65warnings.ca.gov.