Graco LSR Select, Instructions Manual

Page: 107 / 112

Appendix D - Selecting the Outlet Valve, Mounting the Stack to the Press
3A2152B 107
Appendix D - Selecting the Outlet Valve, Mounting the
Stack to the Press
Recommended for the customer to connect an auto-
matic shutoff valve between the screw on the press and
the LSR Select mixer. The LSR select has a solenoid
valve and controls to connect a double acting valve.
The mixer outlet is 3/4”NPT male. When the valve stack
is attached to the screw, care should be taken to ensure
the valve stack is mounted rigidly. External brackets
may be required.
Outlet valve controls on HMI
ti18105a
1/4” Air Supply
for Outlet Valve