Operation
6
3A6623C
Operation
Setup
1. Install supplied ramp onto pallet.
2. Connect Hitch Receiver to line striping or line
removal equipment -
Hitch Receiver Kit 25N787
Manual 3A6720.
3. Install LineDriver coupler to striper or grinder hitch
ball.
4. Latch coupler to locked position (M).
NOTE:
If coupler is too tight to latch or is loose after
latching, coupler needs adjustment. Refer to
5. Insert safety pin in latch
6. Adjust seat forward/backward with lever below seat.
7. Adjust height of pedals to desired position by
removing/replacing bolts (Y).
8. Loosen two bolts (C) on topside of pedals. Rotate
pedal to desired position. Tighten bolts.
9. Continue onto
ti11087a
ti10936a
M
ti11086a
ti11085a
