Operation
3A6623C
7
Startup
1. Check battery charge level. Charge if not fully
charged.
2. Sit on seat to actuate safety switch. Ensure pedals
are not depressed.
3. Disengage Manual Brake on LineDriver and
attached equipment.
4. Turn power switch ON. Buzzer will sound in a few
seconds.
5. Operate control to release attached equipment.
NOTE:
Interlocks in the LineDriver control system
remove drive power if the Power Switch is OFF, the
Direction/Speed Pedals are engaged when switching
power ON, or the driver lifts themself off the seat.
NOTE:
LineDriver motion is forward and reverse. Turns
are made with the striper or grinder.
6. Push striper or grinder handle bars to begin desired
turn.
7. Move pedals to drive LineDriver, as shown below.
Switching from forward to reverse creates a braking
action.
NOTE:
LineDriver stops when both feet are removed
from pedals.
8. Set Manual Brake when not operating LineDriver.
This prevents rolling when on an incline.
Operating on an Incline
•
Engage the Manual Brake before turning the Power
Switch to OFF when parking on an incline.
•
Turn the Power Switch to ON and allow the machine
to initialize before releasing the Manual Brake when
starting on an incline.
Enable ExactMil
™
Speed Control
ExactMil ensures a consistent paint thickness by holding
the speed steady.
1. Stop moving. Turn speed control knob all the way
counterclockwise.
2. Set Speed Switch to ExactMil position.
3. Depress foot pedal to go forward. Adjust speed con-
trol knob to desired speed setting.
NOTE:
ExactMil speed control is only active when mov-
ing forward. Reverse speed is not impacted. ExactMil
speed control limits the maximum speed that can be
obtained with the pedal.
FREEWHEEL HAZARD
Loss of drive power causes LineDriver to freewheel,
which allows it to roll freely.
•
Stay fully seated in the driver’s seat while operat-
ing the LineDriver.
•
If loss of drive power occurs while LineDriver is in
motion, use the Manual Brake to bring LineDriver
to a stop.
•
Always engage Manual Brake before turning
Power Switch OFF or standing up from seat.
ti10937a
ti10935a
ti11009a
